A: This may be because the robot is not in contact with the charging terminals. Place the robot in front of the base station and click on the recharge button. Manually push the robot backward into the base station and confirm that you hear the announcement "Charge”.
A: The location of the base station is not reasonable.
For details, please refer to the section “Placement of Base Station” in the manual.
A: Because the robot power is not enough, you can let the robot return to charging.
Turning on the break point to continue cleaning, the robot will automatically continue the unfinished cleaning when it is fully charged.
A: This is because the cleaning timer appointment has been turned off in the app, you can reset the cleaning appointment in the app.
A: Possibly the left and right wheels are dangling. Place the robot on a level surface and start it up.
A: Add a new appliance in the App, long press the power and recharge button at the same time for 3 seconds to enter the distribution mode, and re-add the device according to the cell phone guidelines.
A: Enter Mijia APP--Add device.
Method 1:Select Add by model, find the corresponding device.
Method 2:Select Nearby Devices, search for nearby devices to add.
A: Press and hold the host button for 3s to close the child lock. In App More Settings, click the re-lock switch button to close the child lock, after closing, the robot will have the voice prompt of “child lock closed”.
A: Check whether the water pipe is connected smoothly, make sure the water three-way valve switch has been opened.
A: Clean foreign matter on the dust collection outlet.